Request a Quote

Regenerative AC/DC Load Simulator RLS Series

Home
Products
Regenerative AC/DC Load Simulator RLS Series

Regenerative Load Simulator in 4 Quadrant Operation

The Regenerative Load Simulator – RLS Series is a programmable AC and DC electronic load designed for testing any AC and DC load application. The 4-quadrant load has several AC and DC emulation modes and flexible configurations of single, split and 3-phase operation, and steady-state or transient executions. 

  • 6kVA / kW to 21kVA / kW in 4U chassis
  • Parallel up to 168kVA/kW 333A per cabinet
  • Dual cabinets up to 252kVA/kW
  • AC, DC output capability
  • Single, split, three-phase, multi-channel configuration
  • Voltage: 350Vac L-N/606Vac L-L or ±500Vdc
  • Frequency range 15Hz-1200Hz
  • Regenerative power > 90%, SiC technology
  • Galvanic isolation from facility AC input to output and between output phases / channels
Download Datasheet
Quote Request
Datasheet
Live Chat
Regenerative Load Simulator - RLS Series
Quote or Rental Request

Request Registration Code for your copy of PPSC Manager 

Need Help?  Contact us or try our live chat.

Regenerative AC/DC Loads > 90% Energy Efficiency

The Regenerative Load Simulator – RLS Series is compact with high-power density, providing 6kVA/kW up to 21kVA/kW in a 4U chassis. Parallel up to 168kVA/kW in a single 19” cabinet or dual cabinets up to 252kVA/kW. Regenerative power is greater than 90% energy efficiency with sink and source capabilities returning energy back to the facility or grid. 

AC/DC Load Applications

The Regenerative Load Simulator RLS Series simulates almost any AC and DC load waveforms.

Test applications: Utility grid, microgrid, EV chargers, EVSE, Vehicle-to-Grid (V2G), Vehicle-to-Home (V2H), Solar PV/grid-tied inverters, home energy storage systems, UPS, PDUs, AC power sources, DC power supplies, and more.

Seamless Load Simulation with Constant Power Voltage Range

Accurately simulate AC/DC loads with seamless transition of voltage ranges. A single constant power voltage range for both higher current at lower voltage and higher voltages at lower currents eliminating the need to switch between voltage ranges. This prevents potential disruptions in output power.

Regenerative Load - RLS Series V-I Profiles AC Mode All Models Q1 Quadrant

Fully Test AC or DC Power with 4 Quadrant Load

4 Quadrant AC DC Regenerative Load - Lagging Current

Ultra-Flexible AC/DC Load Simulation Capabilities

Simultaneous AC and DC load operation of modes per phase(or channel), and the automatic switching of input modes provides test engineers with a unique capability and the highest degree of flexibility. AC, DC input configurations are available in single, split, three phase and multi-channels with optional isolated neutrals in AC and DC.

Full galvanic isolation from facility AC input to load input and between input phases/channels also protects the user and the UUT.  

Flexible AC DC Input Configurations

Easily Generate Harmonics & Inter-Harmonic Waveforms

The Regenerative Load Simulator – RLS Series has a built-in waveform digitizer and scope with fast transient capabilities at 200us time resolution supporting LIST, PULSE and STEP modes.  Waveform generation includes ten Standard, Sine, Square, Triangle, Clipped and Harmonics (inter-harmonics option) generation.

Regenerative AC Power Source Program Transients

Several AC/DC Load Emulation Modes

Regenerative AC/DC Electronic Load capability with both AC and DC operating modes pushes the boundaries of your test environment. Simulate linear and non-linear loads (including rectified), inductive and capacitive loads.

  • AC Modes: Constant Current, Constant Power & Apparent Power, Constant Resistance, Constant Voltage, CC+CR, CC / CS Rectifier Mode 1ø & 3ø
  • DC Modes: Constant Current, Constant Power, Constant Resistance, Constant Voltage, CR+CC
AC and DC Load Emulation Modes-2

Simplify Testing with SmartSource Suite Remote Control Platform

Built-in SmartSource Suite Remote Control Platform

Pacific Power Source’s SmartSource Suite provides full remote control, development, and execution of test sequences in real-time. 

Intelligently monitor, control, and manage testing using the intuitive embedded web browser interface on any mobile device. 

 
SmartSource Suite Test Program Web Interface
Request a Quote

Models Table

Model Rated Power (VA) Output Form Voltage Ranges
(VAC/VDC1)		 Current 2
(AAc/ADC2)		 Input power form (3) rack height
Bench or Rack Mount Models
360RLS 6000 1,2,3 Ø 350 (L-N)/
500		 16.7 / 8.3 3Ø 4U
390RLS 9000 1,2,3 Ø 350 (L-N)/
500		 25.0 / 12.6 3Ø 4U
3120RLS 12000 1,2,3 Ø 350 (L-N)/
500		 33.3 / 16.7 3Ø 4U
3150RLS 15000 1,2,3 Ø 350 (L-N)/
500		 41.7 / 21.0 3Ø 4U
3180RLS 18000 1,2,3 Ø 350 (L-N)/
500		 41.7 / 21.0 3Ø 4U
3210RLS 21000 1,2,3 Ø 350 (L-N)/
500		 41.7 / 21.0 3Ø 4U
000
Model Rated Power (VA) Output Form Voltage Ranges
(VAC/VDC1)		 Current 2
(AAc/ADC2)		 Input power form (3) rack height
Parallel Systems
3240RLS-4 24000 2,3 Ø 350 (L-N)/
500		 66.7 / 33.3 3Ø 15U
3300RLS-4 30000 2,3 Ø 350 (L-N)/
500		 83.3 / 42.0c 3Ø 15U
3360RLS-4 36000 2,3 Ø 350 (L-N)/
500		 83.3 / 42.0 3Ø 15U
3420RLS-4 42000 2,3 Ø 350 (L-N)/
500		 83.3 / 42.0 3Ø 15U
3630RLS-4 63000 2,3 Ø 350 (L-N)/
500		 125.0 / 62.5 3Ø 15U
3840RLS-4 84000 2,3 Ø 350 (L-N)/
500		 166.7 / 83.3 3Ø 28U
31050RLS-4 105000 2,3 Ø 350 (L-N)/
500		 208.3 / 104.0 3Ø 28U
31260RLS-4 126000 2,3 Ø 350 (L-N)/
500		 249.9 / 125 3Ø 28U
31470RLS-4 147000 2,3 Ø 350 (L-N)/
500		 291.6 / 146 3Ø 40U
31680RLS-4 168000 2,3 Ø 350 (L-N)/
500		 333.3 / 167 3Ø 40U

NOTES

  • All RLS models have a single voltage range with constant power profile. This eliminates the need for switching between a high and a low voltage range. If desired, a low voltage range can be simulated.
  • Maximum current ratings shown are available up to maximum power point. Voltage and Current follow constant power profile so higher current at lower voltage and lower current at higher voltage is available.
  • Three phase input: 380 ~ 480 VAC ± 10% input range. All models have active power factor corrected AC inputs. Models above 12kW require 380~480Vac Input service to deliver full power. 208-240Vac models are not available at this time.
  • 19 Inch Cabinet not included with parallel system kits. Contact us for integrated cabinet systems.
  • Lower power RLS models can be upgraded to higher power levels using our POWER FLEX upgrade program. Contact customer service for details.

Key Features

  • Regenerative AC & DC Electronic Load
  • Four Quadrant Operation with energy recovery back to the grid
  • Standard Models in Power Levels from 6kVA to 21kVA. Parallel units up to 168kVA/kW per cabinet. Dual cabinets up to 252kVA/kW.
  • Ultimate Flexibility with 6 configurations: 1, 2 or 3 Phase, dual or triple independent outputs/inputs, single + split outputs/inputs.
  • AC, DC
  • Galvanic Isolation from Facility AC Input to Output and Between Output Phases / Channels
  • Single constant power voltage (Voltage Source mode) or current range (Current Source mode)
  • Precision True-RMS metering of Volts, Amps, Power, VA, Power Factor and Crest Factor
  • Extensive Analog and Digital I/O for ATE and system integration.
  • 380V-480V 3 Phase AC input with Active PFC
  • Harmonics & Inter-harmonics current
  • Advanced waveform capture scope function
  • 200 stored programs for both static and dynamic Transient Testing
  • Sine, Square, Triangle, THD and Arbitrary waveforms
  • LIST, PULSE and STEP Mode Transients
  • Continuous Self Calibration (CSC)
  • Standard Ethernet (LAN), USB, GPIB and RS-232 Interfaces with SCPI compatibility
  • IVI Instrument drivers
  • SmartSource Suite LXI Compliant LAN/Ethernet with embedded web server
  • POWER FLEX upgrade program allows units to be retrofitted for higher power output

Regenerative Power Over 90% Energy Efficiency

  • Efficient energy recovery to the AC Grid supports over 90% energy efficiency and reduces the total amount of power needed to test certain high-power grid connected energy source EUT such as PV Inverter, Wind Inverters or Bidirectional EV Chargers.
  • Test High Power EUTs using only the energy needed to cover equipment power conversion losses.

RLS Series Operating Features

AC/DC Electronic Load:

The programmable AC or DC electronic load has 4-Quadrant capability so both true and apparent power can be drawn with programmable control over power factor, current crest factor, current waveshape etc.

Instead of dissipating the energy received from the unit under test, the RLS load returns up to 90% of the absorbed energy back to the grid.

Time and Cycle Based Transients:

Create and execute transients that occur over a specified time segment or number of cycles to modify the output waveform, voltage, and frequency for any or all phases. An output trigger is provided for synchronizing external test equipment to the actual transient event.

Easy to Use, Multiple Control Options

The RLS Series controller offers both manual and full programmable control.
  • Intuitive Menu and Soft-key Driven Operation
  • LCD Color Screen Touch Panel
  • Shuttle Knob, Numeric Entry Pad
  • LAN, GPIB, RS232 & USB Interfaces, ModBus (Optional)
  • Supports external touch screen via Video output/USB connections
  • SmartSource Suite – Embedded Web Server for Both LAN and USB Interface

Continuous Self Calibration:

Provides exceptional accuracy of the AC or DC output Voltage. When enabled, accuracy improves to ±0.02% referenced to the power source internal voltmeter.

Extensive Waveform Library:

Up to 200 different waveforms can be stored in the waveform library for execution as part of a steady state program or for substitution in any output phase as part of a transient test program. Memory location #1 is a non-editable high resolution sine wave. Locations 2 and higher are editable and can be substituted in any output phase. Store unlimited number of waveforms on the computer using the SmartSource Suite web browser interface.

Phase Conversion:

With the ability to provide single, split and three-phase outputs, the RLS Series is the perfect choice to provide 1 Phase to 2 or 3 Phase or 3 Phase to 1 Phase conversion.

Safety Features & Protection Limits:

Full galvanic isolation protects the user and UUT. Enhanced protection modes are includes programmable  limit protection modes for real power, apparent power, over voltage and over temperature.

Cooling & Energy Savings Mode:

Front forced air intake with rear exhaust. Automatic Fan Speed Control for low acoustic noise and extended fan life.

The Energy Saving Sleep Mode result in low power consumption during idle periods and extends the product life.

Protective Transit Cases for Mobile Applications

Pacific Power Source offers rugged transit cases to protect your AC Source from adverse environmental conditions for mobile and/or military applications.

Specific Benefits:

  • Environmental Protection (shock, vibration, moisture, heat),
  • Unrestricted Equipment Operation,
  • Quick Cover Removal & Installation,
  • Integrated wheels and Handles,
  • Stainless Steel Latches.

Cases available for the following models:

5U Size Case: 360RLS, 390RLS, 3120RLS, 3150RLS, 3180RLS, 3210RLS

Specs

Power Source Specifications

Input Frequency:

DC, 15 to 1200 Hz

DC Voltage Input Range:

0 – 500 Vdc Constant Power Mode.

Load Modes:

Load: AC, DC

Phase Forms:

Single (1), Split (2) and Three Phase (3) Forms Dual, Tripple, 2+1 Forms

AC Voltage Input Range:

30 – 350 Vrms L-N / 0-606 Vrms L-L

Mechanical Specifications

All RLS models are designed for operation in 19-inch equipment racks. Models above 21 kVA require parallel operating of one RLS Master unit and one or more auxiliary no-controller (NC) units. Models 3300RLS through 310500RLS are available as cabinet systems with all internal input and output wiring, terminal blocks and parallel connections included.

Mounting:

Standard 19 inch rack. Slide rails are available as an option for all RLS units.

Height:

See model table for panel or cabinet height.

Depth:

Approximately 25 inch, from the front panel to the rear of the chassis.

Cooling

Front forced air intake with rear exhaust. Automatic Fan Speed Control for low acoustic noise and extended fan life.

The Energy Saving Sleep Mode result in low power consumption during idle periods and extend the life of the product.

Expanding the AC / DC Loads into an Automated Test System

Pacific’s line of SmartRegen® AC/DC electronic loads enables engineers to easily automate their testing by using industry standard software development environments. The RLS series offers standard Ethernet/LAN connectivity, a browser interface, LXI compliance (LAN extensions for Instruments) to ensure inter-operability with other LXI instruments and IVI (Interchangeable Virtual Instrument) driver to speed up ATE test program development.

Solutions

Electronic Load Mode Applications:

This AC or DC electronic programmable AC or DC load with 4-Quadrant capability simulates realistic test scenarios with energy efficiency. The load simulator offers a complementary solution for testing AC products, the utility grid, microgrid, EV chargers, Vehicle-to-Grid (V2G), Vehicle-to-Home (V2H), Solar PV/grid-tied inverters, home energy storage systems, UPS, PDUs, and more. Other applications include Electric Vehicle bidirectional on-board chargers (OBC), DC-DC converters between the HV battery and 12Vdc or 48Vdc subsystems. In DC mode, load mode is available to sink DC current for battery discharging or for testing regenerative breaking subsystems.

Brochures & Manuals

Product Brochure:

Download brochure to review product details.
Download Brochure

Technical and Application Assistance:

Pacific Power Source’s seasoned sales and service team is here to help via chat, email or call 1-800-854-2433.